The angle between the eyebrows cauda and the eyebrows radix should be at the end more obtuse or wider.
Here is initial angle before treatment.

Mark with white pen the upper rim of the eyebrow.

This technique doesnt work for tatoo fake eyebrow .

To get a fox eye,the important point to lift up has to be at 2/3-1/3 from in to out.( orange arrow).

Apply the wooden tonguer parallel to the upper limit of the eyebrow to mark the upper limit of the area which will be worked out.

Lower and Upper Limit of the area which has to be worked out are marked with a white pen .
The orange arrow shows the point to lift up the eyebrow to get the best result for a fox eye look.

Now the previous area has to be divided in squares .
We use usually a wooden tonguer to divide the area in squares from in to out.
Here is 1 st square.

2 nd square.
Remember that for each square will be applied 1 vector normal or perpendicular to the center of the square and 2 tensors looking the point of maximum lift ( 1 from lower rim and the other from upper rim - or white marked borders)

Last square or 3 rd square , the most external one of the 3 squares.
The most important tensor lifting the eyebrow point to get a fox eye will follow the whole internal vertical border of this external square.

Each square has at its center a white marked point, where a vector should be applied.
Each vector will be realized with 0.05 ml of endopeels original product , normal or perpendicular to the square already marked.

Red marked is the maximum point of lifting ( called too maximum projection point) which is at the top of the orange arrow, where all tensors should converge.

Red Arrows for Tensors are looking towards the maximum point of eyebrow lift ( red point at the top of the orange arrow.
Such tensors have to be from the lower ,, white,, line or upper rim of the eyebrow as from the upper ,, white ,, line.
For each tensor use 0.05 ml
Just for the orange tensors,use 0.1 ml.
It is mandatory to apply the syringe completely on the patients skin for each tensor with the right hand ( if you are right haded) and use the 2 nd finger of the left hand put on the maximum lift point or red point to get the good directions of the tensors , pushing against Archimede force, the syringe.

• 1 bottle ,, Endopeel MP,, OR phenitia, only original.
• Take off from this bottle 0.8ml to max 1.0 ml with a needle 18 g without opening the bottle .
• 1 needle 30g 1/2 BD
• 1 Syringhe BD 1ml luer lock thick one
• 1 Desinfectant without alcohol ( chlorexidine without alcohol ) or here Cetrimide ( Aseptiderm) which isnt any more produced still 2022 .
• Garzes 10x 10 cm
• 1 cold cream ,, Rose du Désert,, (other creams may create dermatopathies as they may contain alcohol as arachides )

Desinfect only with non alcoholic solutions like Cetrimid or Chlorexhydine without alcohol applying a garte 10x10 for ex containing chlorexhidine on the marked area for not removing the marking.

1 st vector in the most internal square is done with the syringe normal to the center of the square, injecting 0.05 ml using the syringe BD 1ml luer lock thick one with a needle 30g1/2 BD ( The most flexible one) .
The position of the hand which is injecting is very important . ( Do not inject in the wind without any support )

2 nd vector always with 0.05 ml in the 2 nd square, perpendicular or normal to the center of the square.
The position of the injecting hand is important.

3 rd vector always with 0.05 ml in the 3 rd square, perpendicular or normal to the center of the square.
The position of the injecting hand is important.

Position the syringe on the arrow without moving the hand before injecting.
The whole syringe is in contact with the patients skin.
Never put a finger under the syringe.
The needle has to look towards the maximum point of lifting or projection ( red point).

After having positioned the syringe on the arrow, move it ( gliding or surfing) without moving the hand ( to keep the sense as the direction of the arrow) to the lower limit of the area to be worked out, preparing the 1 st tensor injection from the lower limit.
The syringe has to keep the whole contact with the patients skin without any angulation.

By injecting as 1 st tensor from the lower limit of the area to be worked out, it s necessary to push the syringe during the injection .

Without moving the injecting hand and sliding always the syringe on the arrow, 1 st tensor injection will be too performed from upper limit, always using 0.05 ml and pushing the syringe as previously.

For the second square and to inject the 2 nd Tensors, do same as previously by positioning correctly the syringe before injecting.

After having positioned the syringe on the arrow, move it ( gliding or surfing) without moving the hand ( to keep the sense as the direction of the arrow) to the lower limit of the area to be worked out, preparing the 2nd tensor injection from the lower limit.
The syringe has to keep the whole contact with the patients skin without any angulation.

For the third and last square and to inject the 3rd Tensors, do same as previously by positioning correctly the syringe before injecting.
The syringe as needle have to look as always towards the maximum projection or lifting point ( red point).

After having positioned the syringe on the arrow, move it ( gliding or surfing) without moving the hand ( to keep the sense as the direction of the arrow) to the lower limit of the area to be worked out, preparing the 3rd tensor injection from the lower limit.
The syringe has to keep the whole contact with the patients skin without any angulation.

By injecting as 3rd tensor from the lower limit of the area to be worked out, it s necessary to push the syringe during the injection 

Without moving the injecting hand and sliding always the syringe on the arrow, 3rd tensor injection will be too performed from upper limit, always using 0.05 ml and pushing the syringe as previously.

For the maximum tensor ( orange arrow),do same as previously by positioning correctly the syringe before injecting.
This time,injection will be 0.1 ml ( double dose) towards the red point or maximum projection point.

After having positioned the syringe on the orange arrow, move it ( gliding or surfing) without moving the hand ( to keep the sense as the direction of the arrow) to the lower limit of the area to be worked out, preparing the maximum tensor injection from the lower limit.
The syringe has to be in whole contact with the patients skin without any angulation and towards the maximum point of projection ( red point).

By injecting the maximum tensor from the lower limit of the area to be worked out, it s necessary to push the syringe during the injection .
0.1 ml will be injected.
do not forget to inject the maximum tensor as well from upper limit, always with 0.1 ml.

Prepare for massage the worked area, a cold cream without alcohol and without arachides.
It is recommended to use ,,Rose du Désert,, from Styling Cosmetics AG, Swiss Company.

Massage whole treated area with a cold cream, not alcoholic and without arachides like ,,Rose du Désert,,.